Downhill-Board
Federweg Messen bei => Kona stinky deelux ! - Druckversion

+- Downhill-Board (https://downhill-board.com)
+-- Forum: Mountainbike Downhill, Freeride, Dirt (https://downhill-board.com/forumdisplay.php?fid=3)
+--- Forum: Produkte und Technik (https://downhill-board.com/forumdisplay.php?fid=11)
+--- Thema: Federweg Messen bei => Kona stinky deelux ! (/showthread.php?tid=11595)

Seiten: 1 2


Federweg Messen bei => Kona stinky deelux ! - minou - 2003-07-27

Heureka!!

Ja, der Hinterbau wird hochgehen- wenns schwer geht nimm die Druckstufe raus.
Ansonsten bitte jemand, ihn hochzuhalten [Bild: icon_mrgreen.gif]
Gruß matze


Federweg Messen bei => Kona stinky deelux ! - X-up - 2003-07-27

ja danke man !




Federweg Messen bei => Kona stinky deelux ! - LtoThaEON - 2003-07-27

Das war ne schwere Geburt [Bild: wink.gif] eheh


Federweg Messen bei => Kona stinky deelux ! - KAI - 2003-07-27

Aber sonst alles wissen.... hihi!


Federweg Messen bei => Kona stinky deelux ! - Mr.Radical - 2003-07-27

Oder einfach im eingefederten Zustand den Abstand vom Boden zum Reifen messen!


Federweg Messen bei => Kona stinky deelux ! - x-spirit - 2003-07-28

hier die beschreibung aus der tech-area von der kona-homepage. modell 2000 stinky und stinky deelux haben 5'' federweg was ca. 130mm entspricht.

Extreme Trails "Out Of Bounds" Dual Suspension - STINKY DEE-LUX, STINKY
Kona Out of Bounds dual suspension bikes are suited for extreme trails where steep sections predominate. Frame is designed for high strength and durability, using Kona 7005 Aluminum double-butted tubing and Easton RAD Aluminum tubing. Heavy-duty components and shocks are featured for maximum strength. Bikes are heavier than cross-country dual suspension, but are fitted with triple chainrings to allow for steep uphill sections. Double clamp forks are compatible.

Active, rising rate design built around Fox shocks (7.9" eye to eye: 2.0" stroke).
With a leverage ratio of 2.5:1, the rear wheel has 5" of travel.
Main chain stay pivot is located 35mm above the horizontal hub axle plane, minimizing "pogo" effects caused by changes in chainstay length. It also reduces pedaling force from activating the suspension.
Rectangular rear stays connect to cold-forged swingarms.
Wraparound head tube gusset and downtube gusset (Stinky) Easton RAD top tube and down tube on Stinky Dee-Lux provides added strength and accurate steering.
A total of 8 cartridge bearing pivots on seat tube/rocker pivot, seat stay yoke and bottom bracket yoke.
Custom tuned Fox Vanilla (Stinky) and Fox Vanilla RC (Stinky Dee-Lux).
Stinky & Stinky Dee-Lux standard spring rates: 400 lbs (Small-15"), 450 lbs (Medium-17"), 500 lbs (Long-18"), 550 lbs (Extra Long-19").



Federweg Messen bei => Kona stinky deelux ! - 5th Element - 2003-07-28

Oder mal nen 10 Meter Drop hinlegen und beim aufprall nachmessen, wenn der Dämpfer durchschlägt! [Bild: grin.gif] [Bild: icon_arrow.gif] [Bild: grin.gif]


Federweg Messen bei => Kona stinky deelux ! - X-up - 2003-07-28

bisher warens nur 5 meter ! [Bild: icon_biggrin.gif] [Bild: icon_biggrin.gif] [Bild: laugh.gif]