![]() |
Fox DHX 3.0 coil, 222 mm - Druckversion +- Downhill-Board (https://downhill-board.com) +-- Forum: Downhill Rangers (https://downhill-board.com/forumdisplay.php?fid=5) +--- Forum: Marktplatz (https://downhill-board.com/forumdisplay.php?fid=33) +---- Forum: Mountainbike Komponenten (https://downhill-board.com/forumdisplay.php?fid=27) +---- Thema: Fox DHX 3.0 coil, 222 mm (/showthread.php?tid=37132) |
Fox DHX 3.0 coil, 222 mm - Joga - 2007-09-12 Verkaufe einen Fox DHX 3.0 Dämpfer mit 222 mm Einbaulänge und 450er Feder. Dämpfer wurde nur kurz gefahren und ist daher in einem neuwertigen Zustand. 2007er Modell. Fox DHX 3.0 coil, 222 mm - Mexx - 2007-09-12 Hmm Einbaulänge 222? Ich kenn mich ja noch nicht so aus. Is das von Mitte Befestigungsloch bis Mitte Befestigungsloch??? Wieviel willst haben dafür? Fox DHX 3.0 coil, 222 mm - Joga - 2007-09-12 Genau so ist es, von Mitte Loch bis Mitte Loch. 100 grad aus. Fox DHX 3.0 coil, 222 mm - Mexx - 2007-09-12 Muß mal zu Hause nachmessen und geb dir dann bescheid. Fox DHX 3.0 coil, 222 mm - Joga - 2007-09-12 Welches Bike hast denn? Ok, mach das... Fox DHX 3.0 coil, 222 mm - Mexx - 2007-09-12 Hab ein Norco SIX von 2005 Fox DHX 3.0 coil, 222 mm - helldriver - 2007-09-13 Joga schrieb:100 grad aus. Ist das eine Preisaussage? Wäre evtl. auch an dem Dämpfer interessiert, falls Mexx ihn nicht haben will. Fox DHX 3.0 coil, 222 mm - Joga - 2007-09-13 Wie würdest du 100 Euro sonst verstehen? ![]() 100 exkl. Versand - hier noch mal nur für dich. Hab beim Fotos machen gesehen, dass eine 500er Feder drinnen ist. Fox DHX 3.0 coil, 222 mm - Joga - 2007-10-16 Verkauft. |