![]() |
Scott high octane - Druckversion +- Downhill-Board (https://downhill-board.com) +-- Forum: Downhill Rangers (https://downhill-board.com/forumdisplay.php?fid=5) +--- Forum: Marktplatz (https://downhill-board.com/forumdisplay.php?fid=33) +---- Forum: Komplettbikes und Rahmen (https://downhill-board.com/forumdisplay.php?fid=31) +---- Thema: Scott high octane (/showthread.php?tid=57947) |
Scott high octane - NWA_90 - 2011-08-03 Servus! Verkaufe mein Scott High Octane, Baujahr 2006. Das Bike ist in einem sehr guten Zustand, und hat kaum Gebrauchsspuren, da es nie wirklich zum Einsatz kam. Das Bike wurde regelmäßig gewartet und hat sogar neue Bremsbeläge. Hier ein paar Fakten zu meinem Bike: [ATTACH=CONFIG]42266[/ATTACH][ATTACH=CONFIG]42267[/ATTACH][ATTACH=CONFIG]42268[/ATTACH][ATTACH=CONFIG]42269[/ATTACH] Material: High Octane 180-240mm travel, Alloy 7005 hydroformed tubing carbon subframe adj.headtube for 11/8 and 1.5", bolded disc dropout with 12mm thru axle Gabel : Marzzochi 888 VF2 200mm travel Hinterbaufeder: Fox DHX 4.0 w/adj pro pedal, Reb. Adj Schaltung: SRAM X9 9 Speed Schalthebel: SRAM X9 Trigger Shifter Bremsen: Hayes El Camino Disc, 203mm F + R rotor Bremshebel: Hayes El Camino Disc Sattel : Scott Progressive 8mm CrMo rails Sattelstütze : Race Face Diabolus Lenker: Scott Pilot FR 1.5 Pro, D.B, mid rise, 700mm, black Vorbau: Marzzochi Handlebar Clamp, 62.6mm ext. Felgen: Sun MTX Eight Track, DH disc only Reifen: Scott Charger FR /DH, 26 x 5/2.7Wire Bead Naben: vorne: KT DH 20mm axle 32H, hinten: DT Swiss 440 FR 12mm thru axle 32H / 150mm wide Als kleines Zuckerl gibts einen vollvisier DH-HELM von GIRO und ein SICHERHEITSSCHLOSS GRATIS dazu. Wenn jemand ein paar Bilder von dem Bike sehen will, dann einfach eine E-mail an: nspringer@gmx.at Meine Preisvorstellungen für das Bike wären so ca. € 1500 bis € 2000. Der Preis ist natürlich verhandelbar. |