2006-08-29, 12:26
Also die Fox Luftdämpfer baut Push in USA auf mehr Hub um. Dann müßte das TFT auch hinbekommen.
Zitat:'m not sure how they do the 2.25 conversion. Mine started as a Float HV RL 2". The Push mods included their tuning/valving, removing the lockout etc. The additional mods included the 2.25 conversion as well as adding an internal bottom out bumper(similar to what is on the coil stuff) Total cost was about $190 including the 2.25 and bottom out mods. I got the full meal deal. I think base is about $150.
Zitat:received the shock a few weeks back and wanted to use it in multiple conditions and with different tuning options to post the most accurate response. The Push RP23 is modified to add the .250 of travel to the 2.00 RP23. They also tune the air spring curve to meet the requirements of the single pivot design. The shock is awesome! In the active setting it keeps the wheel on the ground by staying in the middle of the travel. I have also done a few 3-4 ft. drops and have never knocked the O ring off the shaft. When you need to drop the hammer on fire roads switch to propedal shock movement is greatly reduced. I have owned the 5th Element and DHX Air and the Push RP23 just feels right to me.
